LED Einzelausgang DIN-Schiene Netzteil Wxe-75dr-48

Modell Nr .: WXE-75DR-48 Ausgabetyp: Single Zertifizierung: TUV, CE, UL, RoHS, CCC Marke: Omwo Transport Paket: Standard Export Verpackung Herkunft: Zhejiang Verbrauch: Licht, Industrie, Konstruktion, Digitale Produkte, Fahrzeug Fahrmethode : LED Konstantstrommodulation System: PFAW Warenzeichen: OMWO Spezifikation: 159 * 98 * 38mm HS Code: 8504401990 Eigenschaften
• Universeller AC-Eingang / Vollbereich
• Schutz: Kurzschluss / Überlast / Überspannung / Übertemperatur
• Kühlung durch freie Luftkonvektion
• Kann auf DIN-Schiene TS-35 / 7.5 oder 15 montiert werden
• UL508 (industrielle Steuergeräte) zugelassen
• LED-Anzeige für Einschalten
• 100% Volllast-Burn-In-Test
• Schaltfrequenz bei 50KHz festlegen
• 2 Jahre Garantie

Spezifikation

MODEL		WXE-75DR-12	WXE-75DR-24	WXE-75DR-48
OUTPUT	DC VOLTAGE	12V	24V	48V
	RATED CURRENT	6.25A	3A	1.6A
	CURRENT RANGE	0 ~ 6.25A	0 ~ 3A	0 ~ 1.6A
	RATED POWER	75W	75W	75W
	RIPPLE & NOISE (max.) Note.2	100mVp-p	150mVp-p	240mVp-p
	VOLTAGE ADJ. RANGE	12 ~ 14V	24 ~ 28V	48 ~ 53V
	VOLTAGE TOLERANCE Note.3	±2.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±1.0%	±1.0%	±1.0%
	SETUP, RISE TIME	1000ms, 60ms/230VAC 1800ms, 60ms/115VAC at full load
	HOLD UP TIME (Typ.)	60ms/230VAC 12ms/115VAC at full load
INPUT	VOLTAGE RANGE	85 ~ 264VAC 120 ~ 370VDC
	FREQUENCY RANGE	47 ~63Hz
	EFFICIENCY (Typ.)	76%	80%	81%
	AC CURRENT (Typ.)	1.6A/115V 0.96A/230V
	INRUSH CURRENT (Typ.)	COLD START 20A/115VAC 40A/230VAC
	LEAKAGE CURRENT	<1mA/ 240VAC
PROTECTION	OVERLOAD	105 ~ 150% rated output power
		Protection type : Constant current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE	15 ~ 16.5V	29 ~ 34V	58 ~ 65V
		Protection type : Shut down o/p voltage, re-power on to recover
	OVER TEMPERATURE	85°C+5°C (TSW1) detect on heat sink of power transistor
		Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	-10 ~ +60°C (Refer to "Derating Curve")
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85"C, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/°C (0 ~ 50°C)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY &       EMC    (Note 4)	SAFETY STANDARDS	UL508, TUV EN60950-1 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH
	EMC EMISSION	Compliance to EN55011,EN55022 (CISPR22) Class B, EN61000-3-2,-3
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
OTHERS	MTBF	123.1K hrs min. MIL-HDBK-217F (25°C)
	DIMENSION	55.5*125.2*100mm (W*H*D)
	PACKING	0.6Kg; 20pcs/15Kg/1.29CUFT
NOTE	1.                 All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2.                 Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3.                 Tolerance : includes set up tolerance, line regulation and load regulation. 4.                 The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Produktgruppe : DIN-Schienen-Netzteil