Schaltnetzteil Elektrische Ausrüstung LED-Treiber

Modell Nr .: MWNES-25-5 Garantie:> 2 Jahre Eingangsspannung: 15V Startmodus: Selbst erregter Schaltnetzteil Versorgungsspannung: Klemmenergie Verteilungsgerät Modulationssystem: PFAW Marke: Omwo Spezifikation: 159 * 98 * 38mm HS Code: 8504401990 Ausgabetyp: Single Ausgangsleistung: 1 - 50W Anschlussart: Serie Schaltnetzteil Spannungsregelungsmodus: Frequenzmodulation Typ Energieübertragung: Zweiwegübertragung Zertifizierung: CE, UL, RoHS, ISO, CCC, CB, CSA Warenzeichen : OMWO Ursprung: Zhejiang Spezifikationen:
1.CE ROHS genehmigt
2,2 Jahre Garantie
3,79% Wirkungsgrad
4.100-240VAC 0.5A 50 / 60Hz Eingang
Beachten:
A.We haben genug Fähigkeit, Ihren kundenspezifischen Auftrag zu produzieren
B.Samples sind verfügbar
C.Highquality und konkurrenzfähiger Preis.
D. 2 Jahre Krieg, Kauf mit Vertrauen
Verpackung & Lieferung

Packaging Details:	60pcs/ctn
Delivery Detail:	Shipped in 7 days after payment

NES-25-5 Schaltnetzteil 220vac bis 5vdc 25w elektrische Ausrüstung LED-Treiber
25W Single Output Switching Netzteil NES-25 Serie

Universal AC Eingang / Umfassendes Angebot
100% Volllast-Burn-In-Test

SPECIFICATION
OUTPUT
Model	NES-25-5	NES-25-12	NES-25-15	NES-25-24		NES-25-48
DC Voltage	5V	12V	15V	24V		48V
Rated Current	5A	2.1A	1.7A	1.1A		0.57A
Current Range	0 ~ 5A	0 ~ 2.1A	0 ~ 1.7A	0 ~ 1.1A		0 ~ 0.57A
Rated Power	25W	25.2W	25.5W	26.4W		27.36W
Ripple & Noise	80mVp-p	120mVp-p	150mVp-p	200mVp-p		240mVp-p
Voltage Adj. Range	4.75~5.5V	10.8~13.2V	13.5~16.5V	21.6~26.4V		43.2~52.8V
Voltage Tolerance	±2.0%	±1.0%	±1.0%	±1.0%		±1.0%
Line Regulation	±0.5%	±0.5%	±0.5%	±0.5%		±0.5%
Load Regulation	±0.5%	±0.5%	±0.5%	±0.5%		±0.5%
Setup, Rise Time	500ms, 30ms/230VAC   1200ms, 30ms/115VAC at full load
Hold Up Time	50ms/230VAC   10ms/115VAC at full load
INPUT
Voltage Range	85 ~ 264VAC   120 ~ 370VDC
Frequency Range	47 ~ 63Hz
Efficiency	78%	83%	84%	86%		86%
AC Current	0.55A/115VAC   0.35A/230VAC
Inrush Current	Cold Start 45A
Leakage Current	<2mA / 240VAC
PROTECTION
Over Load	110 ~ 150% rated output power
	Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage	5.75~6.75V	13.8~16.2V	17.25~20.25V		27.6~32.4V	55.2~64.8V
	Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT
Working Temp.	-20 ~ +60ºC (Refer to "Derating Curve")
Working Humidity	20 ~ 90% RH non-condensing
Storage Temp., Humidity	-40 ~ +85ºC, 10 ~ 95% RH
Temp. Coefficient	±0.03%/ºC (0 ~ 45ºC)
Vibration	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
Safety Standards	Design refer to UL60950-1, CB(IEC60950-1),CCC GB4943
Withstand Voltage	I/P-O/P:3KVAC   I/P-FG:1.5KVAC   O/P-FG:0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC / 70% RH
EMC Emission	Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
EMC Immunity	Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, EN55024, EN61000-6-1, light industry level, criteria A
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Produktgruppe : Single-Output-Schaltnetzteil