Schaltnetzteil SMPS 100W 5V 20A mit Kurzschlussschutz

Modell Nr .: S-100W-5V Garantie: Lebenslange Garantie Eingangsspannung: 110V / 220V Startmodus: selbsterregte Schaltnetzteil Stromversorgungssystem: Terminal Power Distribution Equipment Modulationssystem: PWM Marke: Waw Transportpaket: Karton Herkunft: China Ausgangstyp: Single-Ausgangsleistung: 51 - 100W Anschlussmodus: Serien-Schaltnetzteil Spannungsregelungsmodus: Breitenmodulationstyp Energieübertragung: Einwegübertragung Zertifizierung: CE, RoHS Marke: waw Spezifikation: 199 * 98 * 38MM HS-Code: 8504401400 Schaltnetzteil SMPS 100W 5V 20A mit Kurzschlussschutz \ n \ n Produkt Beschreibung Eigenschaften \ n \ n 1.Hohe Effizienz und guter Preis \ n 2.Built-in EMI-Filter \ n 3.100% Volllast Burn-in-Test \ n 4.Low Ausgang Ripple und Noise \ n5.Protection: Überlast / Überspannung / Kurzschluss \ n 6.LIFETIME GARANTIE \ n \ n Specifications \ n

MODEL		S-100-5	S-100-7.5	S-100-12	S-100-15	S-100-24	S-100-48
OUTPUT	DC VOLTAGE	5V	7.5V	12V	15V	24V	48V
	RATED CURRENT	20A	13.6A	8.5A	6.7A	4.5A	2A
	CURRENT RANGE	0 ~ 20A	0 ~ 13.6A	0 ~ 8.5A	0 ~ 6.7A	0 ~ 4.5A	0 ~ 2A
	RATED POWER	100W	102W	102W	100.5W	108W	96W
	RIPPLE & NOISE (max)	80 mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	120mVp-p
	VOLTAGE ADJ. RANGE	4.75 ~ 5.5V	6.75 ~ 8.25V	10.8 ~ 13.2V	13.5 ~ 16.5V	21.6 ~ 26.4V	43.2 ~ 52.8V
	VOLTAGE TOLERANCE	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.3%	±0.3%	±0.2%	±0.2%
	LOAD REGULATION	±0.5%	±0.5%	±0.3%	±0.3%	±0.2%	±0.2%
	SETUP, RISE, HOLD TIME	200ms, 80ms, 20ms at full load
INPUT	VOLTAGE RANGE	85 ~ 132VAC/180 ~ 264VAC selected by switch       255 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY	78%	80%	81%	81%	84%	84%
	AC CURRENT	2.4A/115VAC          1.2A/230VAC
	INRUSH CURRENT (max)	COLD START 30A/115VAC 60A/230VAC
	LEAKAGE CURRENT	<1mA / 240VAC
PROTECTION	OVERLOAD	105 ~ 150% rated output power (150 ~ 200% rated output power for S-100-7.5 only)
		Protection type : Shut down o/p voltage, re-power on to recover.
ENVIRONMENT	WORKING TEMP.	-10 ~ +60°C (Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85°C ,10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/ (0 ~ 50)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	Desgin refer to UL1012,EN60950-1,EN61347-1,EN-61347-2 approved
	WITHSTAND VOLTAGE	I/P-O/P:2.5KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
	EMI CONDUCTION & RADIATION	EN55015,EN55022,EN55024,EN61000-2,EN61000-3,EN61547 approved
OTHERS
	DIMENSION	199*98*38mm (L*W*H)
	WEIGHT	0.61Kg
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.

\ n \ n \ n \ n \ n \ n \ n \ n Verpackung & Versand \ n \ n \ n \ n Unsere Dienstleistungen \ n \ n Unternehmensinformationen \ n \ n \ n \ n \ n \ n \ n

Produktgruppe : S-SERIE SCHALTEN STROMVERSORGUNG / CCTVSCHALTUNG STROMVERSORGUNG