5D-60 Single Output Schaltnetzteil 60W 24V 12V 5V Stromversorgung

Modell Nr .: 5D-60 Garantie:> 2 Jahre Eingangsspannung: 24V Startmodus: selbsterregte Schaltnetzteil Stromversorgungssystem: Terminal Power Distribution Equipment Modulationssystem: PFAW Marke: Omwo Marke: OMWO Spezifikation: 159 * 98 * 38mm HS-Code: 8504401990 Ausgangstyp: Single-Ausgang Leistung: 1 - 50W Anschlussmodus: Serie Schaltnetzteil-Spannung Regelmodus: Frequenzmodulation Typ Energieübertragung: Zwei-Wege-Übertragung Zertifizierung: CE, UL, RoHS, ISO, CCC, CB, CSA Größe: 159 * 98 * 38mm Transport-Paket: Standard Export Verpackung Herkunft: Zhejiang • Schutz: Kurzschluss / Überlast / Überspannung \ n • Kühlung durch freie Luftkonvektion \ n • 100% Volllast-Einbrenntest \ n • Fest Schaltfrequenz bei 56KHz \ n • 2 Jahre Garantie \ n \ n \ n CE RoHs SMPS Hersteller D-60 Single Output Schaltnetzteil 60W 24V 12V 5V Stromversorgung für Industrieanlagen \ n

Model Specification	D-60A		D-60B
	CH1	CH2	CH1	CH2
DC Output voltage	5V	12V	5V	24V
Output voltage range ( Note:2 )	±2%	±6%	±2%	±5%
Rated output current	6A	3A	4A	1.8A
Output current range	1-6A	0.2•3A	1-4A	0.2-1.8A
Wave and noise ( Note:3 )	75mVp-p	150mVp-p	75mVp-p	150mVp-p
Inlet stability ( Note:4 )	±0.5%	±1%	±0.5%	±0.5%
Load stability ( Note:5 )	±0.5%	±4%	±0.5%	±4%
DC output power	66W		63W
Efficiency	73%		73%
Adjustable range for DC voltage	CH1; +10, -5%		CH1; +10, -5%
AC input voltage range	85-132VAC/170•264VAC selected by switch 47-63Hz; 240-370VCD
Input current	2A/115V 1A/230V
AC Inrush current	Cold-start current30A/115V 60/230V
Leakage current	<1mA/240VAC
Overload protection	105%-150%Type: cut down output. Reset: auto recovery
Over-voltage protection
High-temperature protection
Temperature coefficient	±0.03%/°C(0 - 50°C)0N+5V
Setup, rise, hold up time	800ms, 50ms, 10ms/115V 300ms, 50ms, 80ms/230VAC
Vibration	10-500Hz . 2G 10min,/ 1 cycle. Pariod for 60min, Each axes
Withstand voltage	Input and output inte rnal : 1.5KvAC, Input and enclosure : 1.5KvAC, Output and enclosure : 0.5KvAC
Isolation resistance	Input and output inte rnal: Input and enclosure. Output and enclosure: 500VDC/100MO
Working temperature and humidity	-10°C - +60°C(Refer to output derating curve), 20% - 90%RH
Store temperature and humidity	-20°C- +85°C, 10% - 95%RH
Overall dimension	159x97x38mm
Weight	0.55Kgs
Safety standards	UL 1012 TUV EN60950(IEC950, UL1950)Approved
EMC standards	CISPR22(EN55022)classB IEC801-2,3,4 IEC555-2Verification
Note: 1. The parameter under the testing condition : 230vAC input ,rated load, 25°C70% RH. Temperature. 2. Tolerance: including setting tolerance, circuit stability and load stability.(Note:5). 3. Wave test: adopting "Al2"clouble wire for 20MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test : the lowest voltage will be up to the highest voltage when the circuit overload. 5. Load stability test: The load is from 0% to 100%. 6. Total output maximum Current, total load can not exceed the maximum output power. 7. C2, 3, 6must be knocked down.

Produktgruppe : Single-Output-Schaltnetzteil