Wxe-100s-24 Netzteil SMPS 24V LED Treiber 36V

Modell Nr .: WXE-100S-24 Garantie:> 2 Jahre Eingangsspannung: 24V Startmodus: selbsterregtes Schaltnetzteil Stromversorgungssystem: Terminalstromverteilungsgerät Modulationssystem: PFAW Marke: Omwo Transportpaket: Standard Exportverpackung Herkunft: Zhejiang Output Art: Einzelnes Ausgangsleistungs: 1 - 50W Verbindungs-Modus: Reihen-Schaltnetzteil-Spannung Regelungs-Modus: Frequenz-Modulationstyp Energie-Getriebe: Zweiweggetriebe Bescheinigung: CE, UL, RoHS, ISO, CCC, CB, CSA Warenzeichen: OMWO Spezifikation: 159 * 98 * 38mm HS-Code: 8504401990 Features: \ nHohe Effizienz, hohe Zuverlässigkeit, niedrige Kosten \ NAC Eingangsbereich durch Schalter ausgewählt \ n100% Volllast Burn-in-Test \ nSchutz: Kurzschluss / Überlast \ nFestschaltfrequenz bei 25KHz \ nKühlung durch freie Luftkonvektion \ n1 Jahr Garantie \ n

SPECIFICATIONS
OUTPUT
Model	WXE-100S-3	WXE-100S-5	WXE-100S-7.5	WXE-100S-12	WXE-100S-15	WXE-100S-18	WXE-100S-24		WXE-100S-27		WXE-100S-48
DC Voltage	3V	5V	7.5V	12V	15V	18V	24V		27V		48V
Rated Current	20A	20A	13.6A	8.5A	6.7A	5.6A	4.5A		3.7A		2A
Current Range	0-20A	0-20A	0-13.6A	0-8.5A	0-6.7A	0-5.6A	0-4.5A		0-3.7A		0-2A
Rated Power	60W	100W	102W	102W	100.5W	100.8W	108W		99.9W		96W
Ripple & Noise	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p		100mVp-p		100mVp-p
Voltage Adj. Range	-5%;+10%	-5%;+10%	±10%	±10%	±10%	±10%	±10%		-4%;+18%		±10%
Voltage Tolerance	±2%	±2%	±1%	±1%	±1%	±1%	±1%		±1%		±1%
Setup, Rise, Hold Up Time	200ms,80ms,20ms at full load
INPUT
Voltage Range	85~132VAC/180~264VAC selected by switch   47~63Hz; 255~370VDC
AC Current	2.4A/115V   1.2A/230V
Efficiency	70%	78%	80%	81%	81%	82%	84%	84%		84%
Inrush Current	Cold start 30A/115V   60A/230V
Leakage Current	<1mA/240VAC
PROTECTION
Over Load	135%~165%
	Protection type: Shut down o/p voltage, recovers automatically after fault condition is removed.
ENVIRONMENT
Working Temp., Humidity	-10ºC~+60ºC; 20%~90%RH
Storage Temp., Humidity	-20ºC~+85ºC; 10%~95%RH
Vibration	10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
SAFETY
Withstand Voltage	I/P-O/P: 1.5KVAC   I/P-FG: 1.5KVAC   O/P-FG: 0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG100M Ohms/500VDC
STANDARD
Safety Standard	Design refer to UL1012
EMC Standard	Design refer to FCC Part15 J Conduction Class B
OTHERS
Dimension	199*98*38mm (L*W*H)
Weight	0.62Kg
Packing	30pcs/18.6Kg/0.72CUFT
NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation

\ n

Produktgruppe : Single-Output-Schaltnetzteil