DC zu DC Stromversorgung 48VDC zu 24VDC 100W Konverter
Basisinformation
Modell: WXESD-100C-24
Produktbeschreibung
Modell Nr .: WXESD-100C-24 Garantie: 2 Jahre Eingangsspannung: 110-220V Startmodus: selbsterregte Schaltnetzteil Stromversorgungssystem: Terminal-Energieverteilungsgerät Modulationssystem: PFAW Marke: Omwo Transportpaket: Standard Export Packing Origin : Zhejiang Output-Art: Einzelnes Ausgangsleistungs: 51 - 100W Verbindungs-Modus: Reihen-Schaltnetzteil-Spannungs-regelnder Modus: Frequenz-Modulationstyp Energie-Getriebe: Zweiwegübertragung Bescheinigung: CER, UL, RoHS, CCC Warenzeichen: OMWO Spezifikation: 159 * 98 * 38mm HS-Code: 8504401990 100W Single-Ausgang DC-DC-Wandler 100W DC-DC-Wandler WXESD-100c-24 \ nEigenschaften: \ n2: 1 breiten Eingangsbereich \ nSchutz: Kurzschluss / Überlast / Überspannung \ N1500VAC I / O Isolation \ nBuilt -in EMI-Filter, niedriges Brummrauschen \ n100% Volllast-Einbrenntest \ nFixierte Schaltfrequenz bei 83 KHz \ n24V und 48V Eingangsspannungsdesign beziehen sich auf LVD \ nNiedrige Kosten Hohe Zuverlässigkeit \ n2 Jahre Garantie
\ n
SPECIFICATION | ||||||||||||||||
OUTPUT | ||||||||||||||||
Model | WXESD-100A-5 WXESD-100C-5 WXESD-100D-5 | WXESD-100B-12 WXESD-100C-12 WXESD-100D-12 | WXESD-100B-24 WXESD-100C-24 WXESD-100D-24 | WXESD-100B-48 WXESD-100C-48 WXESD-100D-48 | ||||||||||||
DC Voltage | 5V | 12V | 24V | 48V | ||||||||||||
Rated Current | 20A | 8.5A | 4.2A | 2.1A | ||||||||||||
Current Range | 0~20A | 0~8.5A | 0-4.2A | 0-2.1A | ||||||||||||
Rated Power | 100W | 102W | 100.8W | 100.8W | ||||||||||||
Ripple & Noise | 100mVp-p | 120mVp-p | 150mVp-p | 150mVp-p | ||||||||||||
Voltage Adj. Range | 4.5~5.5VDC | 11~16VDC | 23~30VDC | 43.2-52.8VDC | ||||||||||||
Voltage Tolerance | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ||||||||||||
Line Regulation | ±0.5% | ±0.3% | ±0.2% | ±0.2% | ||||||||||||
Load Regulation | ±0.5% | ±0.3% | ±0.2% | ±0.2% | ||||||||||||
Setup, Rise Time | 2s,50ms(only D mode) at full load | |||||||||||||||
Hold Up Time | 20ms(only D mode) at full load | |||||||||||||||
INPUT | ||||||||||||||||
Voltage Range | A:9.2~18VDC B:19~36VDC C:36~72VDC D:72~144VDC or 85~132VAC | |||||||||||||||
Efficiency | 74% | 75% | 76% | 75% | 77% | 80% | 78% | 81% | 83% | 78% | 81% | 83% | ||||
DC Current | 4.8A/24V | 2.4A/48V | 1.8A/96V | 4.8A/24V | 2.4A/48V | 1.8A/96V | 4.8A/24V | 2.4A/48V | 1.8A/96V | 4.8A/24V | 2.4A/48V | 1.8A/96V | ||||
Inrush Current | D:18A/96VDC | |||||||||||||||
Leakage Current | <0.75mA/120VAC(SD-100D) | |||||||||||||||
PROTECTION | ||||||||||||||||
Over Load | 105~135% rated output power | |||||||||||||||
Protection type: Hiccup mode,recovers automatically after fault condition is removed | ||||||||||||||||
Over Voltage | 5.75~6.75V/10%load | 16.8~20V/10%load | 31.5~37.5V/10%load | 60.2-79.2/10%load | ||||||||||||
Protection type:Hiccup mode,recovers automatically after fault condition is removed | ||||||||||||||||
ENVIRONMENT | ||||||||||||||||
Working Temp. | -10~+60ºC (Refer to "Derating Curve") | |||||||||||||||
Working Humidity | 20~90%RH non-condensing | |||||||||||||||
Storage Temp.,Humidity | -20~+85ºC,10~95%RH | |||||||||||||||
Temp.Coefficient | ±0.03%/ºC (0~50ºC) | |||||||||||||||
Vibration | 10~500Hz,2G 10min./1cycle,60min.each along X, Y, Z axes | |||||||||||||||
SAFETY &EMC | ||||||||||||||||
Safety Standards | IEC60950-1CB approved by TUV(for D type only) | |||||||||||||||
Withstand Voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||||||||||||
Isolation Resistance | I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC /25ºC /70%RH | |||||||||||||||
EMC Emission | Compliance to EN55022(CISPR22) Class B | |||||||||||||||
EMC Immunity | Compliance to EN61000-4-2,3,4,6,8,light industry level,criteria A | |||||||||||||||
OTHERS | ||||||||||||||||
Dimension | 199*98*38mm(L*W*H) | |||||||||||||||
Weight | 0.55Kg | |||||||||||||||
Packing | 30pcs/16.5Kg | |||||||||||||||
NOTE | ||||||||||||||||
1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | ||||||||||||||||
Produktgruppe : Single-Output-Schaltnetzteil
Premium Related Products
andere Produkte
heiße Produkte
Wendeschneidwerkzeug-EinsatzhalterWasserdichte Tarnung Solar Rucksack TascheSteckdose mit großem LCD 10A 220V2 Lampen LED Down Light 20W Square Shape Einbauleuchten InnenbeleuchtungGefrierschrank Schranktür LichtschalterHochwertiger K Typ Thermoelement TemperatursensorHohe Menge Nahrungsmittelabfall-AbfallbeseitigerCm1 Serie Gehäuseschutzschalter / MCCBHochwertiges UmschaltergehäuseVerriegelungsrelais 150A Relaisrelais 250VAC 3bHochleistungszylinder Induktiver NäherungsschalterHochwertiger Infrarot-BewegungssensorWxe-35s-2 AC / DC Compact Single-Ausgang Gekapseltes LED-Schaltnetzteil10W 24V Industrie-DIN-Schiene NetzteilNetzteil SMPS Source 12V 50W LED Treiber 12V 4A Power DriverMoldes-35-48 48V LED Schaltnetzteil